Floor Distribution Ducts Replacement

REMOVAL
1. Disconnect the battery negative cable.
2. Remove the two screws that hold the passenger side floor duct to the HVAC housing.
3. Remove the duct from the HVAC assembly.
4. Remove the two screws that hold the drivers side floor duct to the HVAC housing.
5. Remove the drivers side duct from the HVAC housing.

INSTALLATION
1. Install the drivers side duct to the HVAC housing. Tighten the two screws to 2 Nm (17 in. lbs.).
2. Install the passenger side duct to the drivers side duct and the HVAC housing. Tighten the two screws to 2 Nm (17 in. lbs.).
3. Connect the battery negative cable.