Rear Door Stationary Window
DOOR GLASSREMOVAL
1. Remove door glass from door.
2. Remove bolt attaching bottom of rearward run channel to door inner panel.
Fig. 6:
3. Remove nuts attaching stationary glass to door (Fig. 6).
4. Separate rearward run channel/stationary glass from door.
5. Pull to separate stationary glass from run channel.
INSTALLATION
1. Ensure glass and run channel are clean.
2. Apply butyl adhesive to glass and insert in glass run channel.
3. Install nuts attaching stationary glass to door and tighten to 3 N.m (30 in. lbs.). (Fig. 6)
4. Install bolt attaching bottom of rearward run channel to door inner panel.
5. Install door glass.