Steering Column Opening Support Bracket Replacement

REMOVAL
1. Remove the steering column opening cover. Steering Column Opening Cover Replacement
2. Remove the two screws and remove the diagnostic connector.
3. Loosen the screws and remove the hood release handle from the bracket.

Fig. 20 Column Opening Bracket:

4. Remove the two bracket screws and slide upward off the locating tabs to remove. (Fig. 20)

INSTALLATION
1. Position the bracket onto the locating tabs and slide down.
2. Install the two screws.
3. Install the diagnostic connector and install the two screws.
4. Install the hood release handle and tighten the screws.
5. Install the steering column opening cover. Steering Column Opening Cover Replacement