Center Seat Back Inertia Hinge Cover
CENTER SEAT BACK INERTIA HINGE COVERREMOVAL
NOTE: Free pivot hinge cover is removed with the free pivot hinge.
1. For the inertia hinge cover disconnect the zip strip (1).
2. Position aside the storage bin/cushion cover (4).
3. Remove the pivot bolt (5).
4. Open the hinge cover at the bottom and remove the hinge cover (1).
INSTALLATION
NOTE: Free pivot hinge cover is installed with the free pivot hinge.
1. Position the hinge cover (1) over the hinge (2) and close over the lock tabs (3).
2. Install the pivot bolt (5) and tighten to 10 N.m (89 in.lbs.).
3. Reposition the storage bin/cushion cover (4).
4. Connect the zip strip (1).