Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL

Fig.29 IAT Sensor Location - 5.9L:

The intake manifold air temperature sensor is located in the front/side of the intake manifold.

1. Clean dirt from intake manifold at sensor base.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.

INSTALLATION
The intake manifold air temperature sensor is located in the front/side of the intake manifold.

1. Install sensor to intake manifold. Tighten to 12 - 15 Nm (110 - 130 in.lbs.) torque.
2. Install electrical connector.