Bucket Seat Back Cover
BUCKET SEAT BACK COVERREMOVAL
Fig. 4:
1. Remove recliner handle (Fig. 4).
2. Remove armrest.
3. Remove seat back assist handle, if equipped.
4. Remove inboard and outboard seat back trim shields.
5. Tilt seat back forward.
6. Disengage zipper at base of seat back.
7. Roll cover upward.
8. Disengage hog rings.
9. Separate cover from seat back.
INSTALLATION
1. Position cover on seat back.
2. Engage hog rings.
3. Roll cover downward.
4. Engage zipper at base of seat back.
5. Install inboard and outboard seat back trim shields.
6. Install seat back assist handle, if equipped.
7. Install recliner handle.
8. Install armrest.