Central Timer Module
[1][2]CENTRAL TIMER MODULEThe AB RAM VAN has two different body electrical systems, High Line and Base.
The High Line utilizes a [1][2]Central Timer Module ([1][2]CTM) to provide the body features listed below. The CTM was designed to reduce cost, wiring complexity, and improve the system reliable. The CTM interfaces with other modules in the vehicle on the Chrysler Collision Detection (CCD) data bus network. The CCD data bus network allows the sharing of information between modules and diagnostic capability using the DRB III (R). The CTM equipped vehicles can be identified by the sound of a Key-In Ignition CHIME.
The Base AB RAM VAN body system is composed of individual modules. Because the stand-alone modules do not communicate on the CCD Bus they cannot be diagnosed using the DRB.
The [1][2]CTM provides the following features:
* CCD Bus Communication
* Central Locking Features
* Chime
* Courtesy Lamp Controls/Illuminated Entry
* Enhanced Accident Response
* Intermittent Wiper Delay
* Power Door Locks W/RKE
* Remote Keyless Entry (RKE)
* Speed Sensitive Intermittent Wipers
* Vehicle Theft Security System (VTSS)
The module is located on the left center instrument panel support. It contains a white 18-way and a green 14-way connector.