Stabilizer Bar: Service and Repair
REMOVAL1. Raise and support the vehicle.
2. Remove link bolt nuts, retainers and insulators from the strut bar.
3. Remove the link bolts, retainers, insulators and spacers from the stabilizer bar.
4. Remove stabilizer bar retainer bolts and remove the bar.
5. Remove the bushings from the stabilizer bar.
INSTALLATION
1. Install the bushings on the stabilizer bar.
2. Position the stabilizer bar on the frame rails.
NOTE: Ensure the bar is centered with equal spacing on both sides.
3. Install stabilizer bar retainers and bolts. Tighten the bolts to 23 Nm (200 in. lbs.).
4. Install the link bolt, retainers, spacer and insulators.
5. Install the link bolts nuts. Tighten the nuts to 11 Nm (100 in. lbs.).
6. Remove support and lower the vehicle.