Mode 1 Circuit Shorted to Ignition or Battery
Test 1 - 4:
Test 5 - 7:
Test 8 - 10:
Test 11:
SYMPTOM
MODE 1 CIRCUIT SHORTED TO IGN OR BATT
TEST NOTE
This symptom is diagnosed using the test ACTUATOR CIRCUIT TEST PASSED, OVERCURRENT DTCs ACTIVE.
WHEN MONITORED
when the Actuator Circuit Test is executed.
SET CONDITION
This message Will set if the A/C - Heater Control detects a short high on the Mode Door 1 Driver circuit.
POSSIBLE CAUSES
- Door driver circuit shorted low
- Door actuator shorted
- Door driver circuit shorted high
- A/C-Heater control module
- Intermittent wiring problem
- Door driver circuits shorted high
- Door driver circuits shorted low
- Door driver circuits shorted together
- Door driver circuits shorted to common door driver circuit
- Door actuators shorted
- A/C-Heater control module
- Intermittent wiring problem