P1762

Test 1 - 2:

Test 3 - 5:

Test 6 - 10:

Test 11:

SYMPTOM
P1762-GOV PRESS SEN OFFSET VOLTS TOO LO OR HIGH

WHEN MONITORED
Continuously with the key on and the engine running

SET CONDITION
This code will set if the governor pressure is out of range in park or neutral for 1.3 seconds for three consecutive bad 3.0 second tests and sump temp > 10 °C (50 °F) and < 127 °C (260 °F) are required to set the code.

POSSIBLE CAUSES
- Governor pressure sensor signal circuit short to voltage
- 5 Volt supply circuit short to sensor ground
- 5 Volt supply circuit short to ground
- Governor pressure sensor
- Governor pressure sensor - below 3 psi
- Internal transmission problem
- Powertrain control module
- Intermittent wiring and connectors