P1763

Test 1:

Test 2 - 6:

Test 7 - 10:

Test 11 - 14:

Test 15:

SYMPTOM
P1763-GOVERNOR PRESSURE SENSOR VOLTS TOO HI

WHEN MONITORED
Continuously with the key on and the engine running.

SET CONDITION
This code will set when the voltage from the governor pressure sensor is above 4.89 volts for 8.5 seconds.

POSSIBLE CAUSES
- Other transmission DTC's present
- Park neutral DTC present
- 5 Volt supply circuit open
- GOV pressure sensor signal circuit open
- Sensor ground circuit open
- GOV press sensor signal CKT short to voltage
- 5 volt Supply Circuit Open Inside Trans
- GOV press sensor signal CKT open inside trans
- GOV press sensor ground CKT open inside trans
- GOV press sensor signal CKT short to voltage inside trans
- Governor pressure sensor (high)
- Powertrain control module
- Intermittent wiring and connectors