Body Control Module: Service and Repair

FRONT CONTROL MODULE

REMOVAL
1. Disconnect the positive and negative battery cables from the battery.
2. Partially remove the integrated power module from the engine compartment .
3. Remove the front control module retaining screws.
4. Using both hands, pull the front control module straight from the integrated power module assembly to disconnect the 49-way electrical connector and remove the front control module from the vehicle.

INSTALLATION
1. Install the front control module on the integrated power module assembly by pushing the 49-way electrical connector straight in.
2. Install the front control module retaining screws. Torque the screws to 7 in. lbs.
3. Install the integrated power module.
4. Connect the positive and negative battery cables.