3 Passenger Rear

SEAT - 3 PASSENGER REAR

REMOVAL

Fig. 9:

NOTE: The 3-passenger rear seat is attached with hooks and anchors at the rear supports, and with latches and anchors at the front supports (Fig. 9).

1. Disconnect each shoulder belt connector.
2. Lift latch lever from front anchors at each corner of seat. Raise seat at front (Fig. 9).
3. Push the front seat rearward detaching seat from rear anchors.
4. Lift seat from floor pan.
5. Separate seat from vehicle.

INSTALLATION

NOTE: The 3-passenger rear seat is attached with hooks and anchors at the rear supports, and with latches and anchors at the front supports (Fig. 9).

1. Position seat in vehicle. Insert the rear hooks in the floor panel slots.
2. Insert rear hooks in floor pan slots.
3. Pull seat forward to engage rear hooks with rear anchors.
4. Lift latch lever at each front corner of seat.
5. Force front seat frame downward.
6. Engage latch levers with front anchors.
7. Connect each shoulder belt at upper anchor bolt.