Daytime Running Lamp Control Unit: Service and Repair

DAYTIME RUNNING LAMP MODULE

Fig. 5 Daytime Running Light Module:

REMOVAL
The Daytime Running Light Module (DRLM) is mounted in the engine compartment on the bottom of the cowl plenum next to the windshield wiper motor.

1. Disconnect and isolate the battery negative cable.
2. Remove the bolts holding the (DRLM) and bracket to the vehicle.
3. Disconnect the electrical connector.

INSTALLATION
1. Connect the electrical connector to the module.
2. Install the bolts holding the (DRLM) and bracket to the vehicle.
3. Connect the battery negative cable.