Clearance Lamp: Service and Repair

CLEARANCE LAMP UNIT

REMOVAL
1. Disconnect and isolate the battery negative cable.

Clearance Lamp Unit Remove/Install:

2. Remove the two screws that secure the clearance lamp unit to the vehicle.
3. Pull the clearance lamp unit away from the vehicle far enough to access and disconnect the vehicle wire harness from the bulb holder connector receptacle.
4. Remove the clearance lamp unit from the vehicle.

INSTALLATION
1. Position the clearance lamp unit close enough to the vehicle to reconnect the vehicle wire harness to the bulb holder connector receptacle.
2. Position the clearance lamp unit to the vehicle.
3. Install and tighten the two screws that secure the clearance lamp unit to the vehicle.
4. Reconnect the battery negative cable.