DRW
BRAKE PADS/SHOES - FRONTREMOVAL (DRW)
1. Unscrew the cap from the brake fluid reservoir.
2. Raise and support the vehicle.
3. Remove the front wheels .
4. Remove the wear indicator cable and the wear indicator (Fig. 5).
NOTE: Seal off the line ends and connection threads in the brake calipers with plugs. Also check brake hoses for signs of cracks.
5. Remove the brake caliper guide bolt (Fig. 5).
6. Remove the brake caliper (Fig. 5).
7. Remove the brake pads (Fig. 5).
INSTALLATION (DRW)
1. Install the brake pads (Fig. 5).
2. Install the wear indicator cable and the wear indicator (Fig. 5). Tighten to 10 Nm (89 inch lbs.).
NOTE: Do not install the brake hose twisted and ensure freedom of movement.
3. Install the brake caliper to the brake caliper adapter (Fig. 5). Tighten the guide bolt to 25 Nm (221 inch lbs.) (M8 bolt) or Tighten the guide bolt to 30 Nm (265 inch lbs.) (M10 10.9 bolt).
4. Bleed the brake system.
5. Check the brake system for any leaks.
6. Install the front wheels.
7. Lower the vehicle.