Cruise Control Switch: Service and Repair

REMOVAL

Speed Control Switch Location:

The speed control switch is mounted to the back of the multi-function switch. The multi-function switch must be removed first to gain access to the speed control switch mounting screw.
1. Remove and isolate negative battery cable from battery.
2. Remove multi-function switch. Refer to MultiFunction Switch Removal/Installation.

Speed Control Switch Removal/Installation:

3. Remove switch mounting screw.
4. Remove speed control switch from multi-function switch.
5. Unplug pigtail electrical connector from instrument panel wiring harness.

INSTALLATION
The speed control switch is mounted to the back of the multi-function switch.
1. Position speed control switch to back of multifunction switch.
2. Install switch mounting screw. Refer to Torque Specifications. Install multi-function switch. Refer to Multi-Function Switch Removal/Installation.
3. Plug pigtail electrical connector into instrument panel wiring harness. Be sure wires are not pinched.
4. Install negative battery cable to battery.