Cylinder Block Assembly: Specifications
CrankshaftBolt-Crankshaft Bearing Cap to Crankcase
(2 stages, torque, torque angle) 55 Nm (40 ft. lbs.), plus 90°
Bolt- End Cover to Crankcase 9 Nm (80 inch lbs.)
Bolt-Timing Case Cover to Crankcase 20 Nm (15 ft. lbs.)
Connecting Rod
Bolt-Connecting Rod Cap to Connecting Rod
(3 stage, 1&2 torque, 3 torque angle) 5, 25 Nm (44, 221 inch lbs.), plus 90°
Crankshaft
Bolt-Crankshaft Bearing Cap
(2 stage, 1 torque, 2 torque angle) 55 Nm (40.5 ft. lbs.), plus 90°
Piston
for specifications regarding this component Procedures
Piston Ring
for specifications regarding this component Service and Repair
Crankshaft Pulley
for specifications regarding this component Service and Repair