Headlamp: Service and Repair

Removing and installing headlamp




1 Decorative grille
2 Phillips screw
3 Headlamp
4 Phillips screw
5 Turn signal lamp

Removal, installation

1 Open engine hood.
2 Unscrew Phillips screws (2), remove decorative grille (1).
3 Remove turn signal lamp (5).
4. Disconnect connector and vacuum hose on rear of headlamp.
5. Unscrew Phillips screws (4) and remove headlamp (3).
6. Reinstall in opposite order.

Installation: Check headlamp adjustment

Remove/install headlamps




1 Phillips screw
2 Headlights
3 Cover

Remove/Install

1 Remove front grille
Up to model year 2003
As of model year 2003

2 Unscrew cover (3)
3 Release connector at rear of headlamp and unplug
4 Take out Phillips screws (1), remove headlamp (2)
5 Install in the reverse order

Installation: Check headlamp adjustment