Vacuum Transducer

REMOVAL - VACUUM TRANSDUCER
1. Disconnect the negative battery cable.
2. Remove the air cleaner housing.
3. Disconnect the electrical connector.
4. Disconnect the vacuum hoses.
5. Remove the vacuum transducer retaining bolts and remove vacuum transducer.

INSTALLATION - VACUUM TRANSDUCER
1. Position vacuum transducer and install the retaining bolts. Tighten bolts to 70 inch lbs. (8 Nm).
2. Connect vacuum hoses.
3. Connect electrical connector
4. Install air cleaner housing.
5. Connect negative battery cable.