Bench Seat Riser - Second Row Flat Floor

BENCH SEAT RISER SECOND ROW FLAT FLOOR

REMOVAL

1. Remove seat from vehicle.
2. Place seat bottom side up on a clean covered work surface.

Fig. 90:

3. Remove bolts attaching seat riser to seat cushion frame (Fig. 90).
4. Remove riser from seat.

INSTALLATION

1. Place riser in position on seat.
2. Install bolts attaching seat riser to seat cushion frame (Fig. 90). Tighten bolts to 48 N.m (35 ft.lbs.) torque.
3. Install seat into vehicle.