Remote Keyless Entry Customer Preferences

STANDARD PROCEDURE - RKE CUSTOMER PREFERENCES HORN CHIRP DISABLING / ENABLING
The horn chirp can be toggled using a DRB III or by using the Remote Keyless Entry (RKE) transmitter. To DISABLE (cancel) the horn chirp feature: With the ignition in the ON position, press and hold the transmitter LOCK button for four seconds. While pressing the LOCK button in, press the PANIC button within 6 seconds. Release both buttons when a single chime is heard. To ENABLE the horn chirp feature, repeat the above procedure.

Unlock Sequence
The unlock sequence can be toggled using a DRB III or by using the following procedure.
1. Place the key in the ignition.
2. Within 10 seconds, cycle the key from the OFF position to the ON position four times, ending in the ON position (Do not start the engine).
3. Within 30 seconds, press the driver��s door lock switch in the UNLOCK direction. A single chime will be heard to indicate the feature has been disabled. This will toggle between Driver door first and Unlock all doors function. To ENABLE this feature, repeat the above procedure.