Fog Lamp Unit Replacement

REMOVAL

NOTE: The fog lamps are serviced from the rearward side of the front bumper.

1. Disconnect and isolate the battery negative cable.
2. Disengage the fog lamp harness connector.

Fig.6 Front Fog Lamp:

3. Remove the bolts attaching the fog lamp to the bumper.
4. Separate the fog lamp from bumper.

INSTALLATION
1. Position the fog lamp in the bumper.
2. Install the bolts attaching the fog lamp to the bumper.
3. Connect the fog lamp harness connector.
4. Check for proper operation and beam alignment (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/FOG LAMP UNIT - ADJUSTMENTS).
5. Connect the battery negative cable.