Parking Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the park and turn signal lamp.

Fig.17 Park And Turn Signal Lamp Bulb:

3. Rotate bulb socket 1/4 turn counterclockwise and remove the turn signal lamp socket from the back of the lamp.
4. Remove the park and turn signal lamp bulb from the socket.

INSTALLATION
1. Install park and turn signal lamp bulb in socket.
2. Install park and turn signal lamp socket into back of lamp.
3. Install park/turn signal lamp.
4. Connect the battery negative cable.