Tail Lamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove screws from tail lamp.
3. Grasp lamp, firmly pull lamp rearward to disengage retaining studs.

Fig.18 Tail, Brake, Turn Signal Lamp:

4. Remove sockets from tail lamp.
5. Pull bulb from socket.
6. Separate tail lamp from cargo box.


INSTALLATION
1. Install bulb in socket.
2. Install socket in tail lamp.
3. Position tail lamp in cargo box, engage retaining studs and install screws.
4. Connect the battery negative cable.