Rear

REMOVAL

WARNING: DURING AND FOLLOWING ANY SEAT BELT OR CHILD RESTRAINT ANCHOR SERVICE, CAREFULLY INSPECT ALL SEAT BELTS, BUCKLES, MOUNTING HARDWARE, RETRACTORS, TETHER STRAPS, AND ANCHORS FOR PROPER INSTALLATION, OPERATION, OR DAMAGE. REPLACE ANY BELT THAT IS CUT, FRAYED, OR TORN. STRAIGHTEN ANY BELT THAT IS TWISTED. TIGHTEN ANY LOOSE FASTENERS. REPLACE ANY BELT THAT HAS A DAMAGED OR INOPERATIVE BUCKLE OR RETRACTOR. REPLACE ANY BELT THAT HAS A BENT OR DAMAGED LATCH PLATE OR ANCHOR PLATE. REPLACE ANY CHILD RESTRAINT ANCHOR OR THE UNIT TO WHICH THE ANCHOR IS INTEGRAL THAT HAS BEEN BENT OR DAMAGED. NEVER ATTEMPT TO REPAIR A SEAT BELT OR CHILD RESTRAINT COMPONENT. ALWAYS REPLACE DAMAGED OR FAULTY SEAT BELT AND CHILD RESTRAINT COMPONENTS WITH THE CORRECT, NEW AND UNUSED REPLACEMENT PARTS LISTED IN THE DAIMLERCHRYSLER MOPAR PARTS CATALOG.

1. Unsnap and remove the rear seat belt turning loop trim cover to access the screw that secures the turning loop to the quarter inner panel (club cab) or the C-pillar (quad cab).

Fig.39 Rear Seat Belt And Retractor - Club Cab:

Fig.40 Rear Seat Belt And Retractor - Quad Cab:

2. Remove the screw that secures the seat belt turning loop to the quarter inner panel (club cab) or the C-pillar (quad cab).
3. Remove the seat belt turning loop from the quarter inner panel (club cab) or the C-pillar (quad cab).
4. Remove the trim panel from the quarter inner panel (club cab) (Refer to BODY/INTERIOR/ QUARTER TRIM PANEL - REMOVAL) or the C-pillar (quad cab) (Refer to BODY/INTERIOR/C-PILLAR TRIM - REMOVAL).
5. Remove the screw that secures the lower seat belt anchor plate to the quarter inner panel (club cab) or the C-pillar (quad cab).
6. Remove the lower seat belt anchor plate from the quarter inner panel (club cab) or the C-pillar (quad cab).
7. Remove the screw that secures the retractor to the quarter inner panel (club cab) or the C-pillar (quad cab).
8. Remove the rear seat belt and retractor unit from the quarter inner panel (club cab) or the C-pillar (quad cab).

INSTALLATION

WARNING: DURING AND FOLLOWING ANY SEAT BELT OR CHILD RESTRAINT ANCHOR SERVICE, CAREFULLY INSPECT ALL SEAT BELTS, BUCKLES, MOUNTING HARDWARE, RETRACTORS, TETHER STRAPS, AND ANCHORS FOR PROPER INSTALLATION, OPERATION, OR DAMAGE. REPLACE ANY BELT THAT IS CUT, FRAYED, OR TORN. STRAIGHTEN ANY BELT THAT IS TWISTED. TIGHTEN ANY LOOSE FASTENERS. REPLACE ANY BELT THAT HAS A DAMAGED OR INOPERATIVE BUCKLE OR RETRACTOR. REPLACE ANY BELT THAT HAS A BENT OR DAMAGED LATCH PLATE OR ANCHOR PLATE. REPLACE ANY CHILD RESTRAINT ANCHOR OR THE UNIT TO WHICH THE ANCHOR IS INTEGRAL THAT HAS BEEN BENT OR DAMAGED. NEVER ATTEMPT TO REPAIR A SEAT BELT OR CHILD RESTRAINT COMPONENT. ALWAYS REPLACE DAMAGED OR FAULTY SEAT BELT AND CHILD RESTRAINT COMPONENTS WITH THE CORRECT, NEW AND UNUSED REPLACEMENT PARTS LISTED IN THE DAIMLERCHRYSLER MOPAR PARTS CATALOG.

1. Position the rear seat belt and retractor unit onto the quarter inner panel (club cab) or the C-pillar (quad cab).
2. Install and tighten the screw that secures the retractor to the quarter inner panel (club cab) or the C-pillar (quad cab). Tighten the screw to 40 N-m (29 ft. lbs.).
3. Position the lower seat belt anchor plate onto the quarter inner panel (club cab) or the C-pillar (quad cab).
4. Install and tighten the screw that secures the lower seat belt anchor plate to the quarter inner panel (club cab) or the C-pillar (quad cab). Tighten the screw to 40 N-m (29 ft. lbs.).
5. Reinstall the trim panel onto the quarter inner panel (club cab) (Refer to BODY/INTERIOR/ QUARTER TRIM PANEL - INSTALLATION) or the C-pillar (quad cab) (Refer to BODY/INTERIOR/ C-PILLAR TRIM - INSTALLATION).
6. Position the seat belt turning loop onto the quarter inner panel (club cab) or the C-pillar (quad cab).
7. Install and tighten the screw that secures the seat belt turning loop to the quarter inner panel (club cab) or the C-pillar (quad cab). Tighten the screw to 30 N-m (22 ft. lbs.).
8. Snap the trim cover over the rear seat belt turning loop anchor plate to conceal the screw that secures the turning loop to the quarter inner panel (club cab) or the C-pillar (quad cab).