Windshield Washer Spray Nozzle: Service and Repair

REMOVAL
1. Remove the wiper arms from the wiper pivots. (Refer to WIPER ARMS - REMOVAL).
2. Remove the cowl plenum cover/grille panel from the top of the cowl plenum.
3. From the underside of the cowl plenum cover/ grille panel, disconnect the washer hose from the nozzle fitting.
4. From the underside of the cowl plenum cover/ grille panel, compress the snap features of the washer nozzle and push the nozzle out through the top of the panel.

INSTALLATION
1. Align the washer nozzle with the opening on the top of cowl plenum cover/grille panel.
2. Using hand pressure, push the washer nozzle into the opening from the top of the cowl plenum cover/grille panel until the snap features of the nozzle are fully engaged.
3. From the underside of the cowl plenum cover/ grille panel, reconnect the washer hose to the nozzle fitting.
4. Reinstall the cowl plenum cover/grille panel onto the top of the cowl plenum.
5. Reinstall the wiper arms onto the wiper pivots. (Refer to WIPER ARMS - INSTALLATION)