Compressor Clutch Relay: Service and Repair

REMOVAL
1. Disconnect and isolate the negative battery cable.




2. Locate the power distribution center (PDC) (1).
3. Open the PDC cover (2).

NOTE: Refer to the fuse and relay layout map on the inner surface of the PDC cover for A/C clutch relay identification and location.
4. Remove the A/C clutch relay (3) from the PDC.

INSTALLATION

NOTE: Refer to the fuse and relay layout map on the inner surface of the PDC cover for A/C clutch relay identification and location.




1. Position the A/C clutch relay (3) into the proper receptacle of the PDC (1).
2. Align the A/C clutch relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully seated.
3. Close the PDC cover (2).
4. Reconnect the negative battery cable.