Rear

STABILIZER BAR

REMOVAL
1. Raise and support vehicle.





2. Remove lower links mounting nuts (1).
3. Remove stabilizer bar retainer bolts (2) and retainers (6) at the axle (4).
4. Remove the park brake cable bracket from the retainers.
5. Remove stabilizer bar (3) and remove bushings (5).

INSTALLATION





1. Install stabilizer bar bushings (5).
2. Install the stabilizer bar (3) and center it with equal spacing on both sides.
3. Install stabilizer bar retainers (6) and tighten bolts (2) to 61 Nm (45 ft. lbs.).
4. Install the park brake cable bracket to the retainers.
5. Install the links (1) on the stabilizer bar (3). Install mounting bolts and nuts.
6. Remove support and lower vehicle.
7. Tighten stabilizer link lower nuts (2) to 102 Nm (75 ft. lbs.).