Cluster Lens, Hood, and Mask

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel.
3. From the back of the instrument cluster (2), remove the eight screws (1) around the outer perimeter of the rear cover that secure the lens, hood, and mask unit to the cluster housing.




4. Remove the lens, hood, and mask unit (2) from the face of the instrument cluster (1).




1. Position the cluster lens, hood, and mask unit (2) over the face of the instrument cluster (1). Be certain that the odometer/trip odometer switch button (4) is inserted through the proper clearance holes (3) in the mask and the lens.




2. From the back of the instrument cluster (2), install and tighten the eight screws (1) around the outer perimeter of the rear cover that secure the lens, hood, and mask unit to the cluster housing. Tighten the screws to 1 Nm (10 in. lbs.).
3. Reinstall the instrument cluster onto the instrument panel.
4. Reconnect the battery negative cable.