Seat - Third Row

SEAT - THIRD ROW - STOW - N - GO

REMOVAL

1. Fold third row seat into floor well.

Fig. 107:

2. Using a trim stick, unclip anchor molding (Fig. 107).

Fig. 108:

3. Remove third row seat attaching bolts (Fig. 108).
4. Raise seats to the upright position.

Fig. 109:

5. Remove rear attaching bolts (Fig. 109).
6. Remove rear seat from vehicle.

INSTALLATION

Fig. 110:

1. Place rear seat into position (Fig. 110).

Fig. 111:

2. Install rear attaching bolts to seat (Fig. 111). Tighten bolts to 89 N.m (66 ft.lbs.) torque and follow tightening sequence.
3. Fold the rear seat into the floor well.

Fig. 112:

4. Install attaching bolts (Fig. 112). Tighten bolts to 58 N.m (43 ft.lbs.) torque.

Fig. 113:

5. Place the rear seat lower trim cover into position and press clips into the lock position (Fig. 113).
6. Raise third row seat into upright position.