Rear Cab Back Panel Trim
REAR CAB BACK PANEL TRIMREMOVAL
1. If equipped, remove the three bolts (1) that secure the rear storage compartment (2) to the floor panel (3) and remove the storage compartment from the rear cab trim panel (4).
2. If equipped, using a trim stick C-4755 or equivalent, disengage the latch (4) for the utility hook cover (3) and open the cover to gain access to the screw (1) that secures the utility hook (2) to the rear cab back panel.
3. On Regular cab models, remove the lower B-pillar trim panels, Refer to Trim Panel.
4. On Regular cab models, remove the utility hook (3) or the storage bin latch (4) (depending on application) from the rear cab trim panel (1) and remove the trim panel.
5. On Quad Cab models, remove the child seat tether straps from the rear cab back panel (2).
6. On Quad Cab models, remove the center seat belt trim bezel.
7. On Quad Cab models, remove the lower C-pillar trim panels, Refer to Trim Panel.
8. On Quad Cab models, remove the two push-pin fasteners (1 and 4) that secure the rear cab trim panel (3) to the rear cab back panel and remove the trim panel.
INSTALLATION
1. On Quad Cab models, position the rear cab trim panel (3) onto the rear cab back panel (2) and install the two push-pin fasteners (1 and 4).
2. On Quad Cab models, install the lower C-pillar trim panels.
3. On Quad Cab models, install the center seat belt trim bezel.
4. On Quad Cab models, install the child seat tether straps.
5. On Regular cab models, position the rear cab trim panel (1) onto the rear cab back panel (2) and install the utility hook (3) or the storage bin latch (4) (depending on application).
6. On Regular cab models, install the lower B-pillar trim panels.
7. If equipped, position the rear storage compartment (2) onto the rear cab trim panel (4) and install the three bolts (1). Tighten the bolts to 6 N.m (55 in.lbs.).