Rear Brake Lines

REMOVAL - REAR TUBE / HOSE ASSEMBLY
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support the vehicle.
3. Remove the brake line located at the axle.





4. Remove the mounting bolt for the brake hose at the axle.
5. Remove the banjo bolt at the caliper.
6. Remove the hose.

INSTALLATION - REAR TUBE / HOSE ASSEMBLY
1. Install the hose.
2. Install the banjo bolt at the caliper.
3. Install the mounting bolt for the brake hose at the axle.
4. Install the brake line located at the axle.
5. Lower the vehicle and remove the support.
6. Remove the prop rod.
7. Bleed the brake system.