Brackets

BRACKETS

REMOVAL




1. Remove the winch (2).




2. Remove the upper bolts (1) and remove the frame brackets (2).




3. Separate one of the roller shaft clips (1), remove the shaft (3) and the roller (4).




4. Remove the bolts (3) and separate the support bracket (1) from the winch assembly (2).

INSTALLATION




1. Install the support bracket (1) and install the bolts (3).
2. Tighten the bolts to 108 N.m (80 ft.lbs.).




3. Position the wire rope through the roller opening and install the roller (4), shaft (3) and clip (1).




4. Install the frame bracket (2) and install the upper bolt (1) and nut (4) and hand tighten.




5. Install the winch (2).