Operation CHARM: Car repair manuals for everyone.

Without Cargo Box

REMOVAL
1. Disconnect and isolate the negative battery cable.




2. Disconnect the body wire harness connector from the tail lamp wire harness connector.
3. Remove the tail lamp unit connector from the frame rail.
4. Remove the two nuts that secure the tail lamp housing to the mounting bracket.
5. Remove the tail lamp unit from the mounting bracket while routing the wire harness through the bracket.

INSTALLATION
1. Position the tail lamp unit onto the mounting bracket while routing the wire harness through the bracket.
2. Install the two nuts that secure the tail lamp housing to the mounting bracket.
3. Connect the tail lamp wire harness connector to the body wire harness connector.
4. Install the tail lamp connector retainer to the frame rail.
5. Reconnect the negative battery cable.