Headlamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the push pins attaching the seal to the fender.





3. Remove the bolts attaching the headlamp unit to the fender.
4. Remove the bulb sockets from the headlamp unit
5. Separate headlamp unit from vehicle.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Install the bulb sockets for the front park/turn signal and headlamp.
2. Position headlamp unit in inner fender panel.
3. Install the bolts attaching headlamp unit to the fender.
4. Align the seal and install the push pins.
5. Connect the battery negative cable.