Driver Cylinder Lock Switch Input Stuck (With VTSS Only)

Test 1 - 3:

SYMPTOM
DRIVER CYLINDER LOCK SWITCH INPUT STUCK (WITH VTSS ONLY)

WHEN MONITORED
At all times when battery power is supplied to the Instrument Cluster.

SET CONDITION
When the Instrument Cluster senses voltage to the driver cylinder lock switch between 1.3 and 3.75 for over 10 seconds.

POSSIBLE CAUSES
- DTC present
- Instrument cluster - driver cylinder lock switch voltage incorrect
- Driver cylinder lock switch MUX circuit partial short to ground
- Cylinder lock switch stuck