Passenger Off Indicator Circuit Shorted to Ground

Test 1 - 2:

Test 3 - 6:

Test 7 - 9:

Test 10:

SYMPTOM
PASSENGER OFF INDICATOR CIRCUIT SHORT TO GROUND

WHEN MONITORED
When the ignition is on, the ACM monitors the PAB Indicator Driver circuit for voltage on the PAB Off indicator circuit.

SET CONDITION
The code will set if the ACM cannot detect voltage on the PAB Indicator Driver circuit.

POSSIBLE CAUSES
- Active ACM run - start codes
- Checking equipment
- Fused ignition switch output run - start
- Switch disconnected
- PAB on - off indicator open
- Passenger airbag indicator driver circuit open
- Passenger airbag indicator driver circuit short
- ACM, passenger on - off indicator circuit open
- Stored code or intermittent condition
- Active code present