P1495

Test 1 - 2:

Test 3 - 7:

SYMPTOM
P1495-LEAK DETECTION PUMP SOLENOID CIRCUIT

WHEN MONITORED
Continuously when the ignition is on and battery voltage is greater than 10.4 volts.

SET CONDITION
The state of the solenoid circuit does not match the PCM's desired state.

POSSIBLE CAUSES
- Good trip equal to zero
- (K125) Generator source circuit open
- (K106) Leak detection pump solenoid control circuit open
- (K106) LDP Solenoid control circuit shorted to ground
- Leak detection pump
- PCM