Without Cargo Box

REMOVAL
1. Disconnect and isolate the negative battery cable.




2. Remove the four screws that secure the tail lamp lens to the tail lamp housing.
3. Separate the tail lamp lens from the tail lamp housing.
4. Push the backup lamp bulb inward and rotate it counter-clockwise.
5. Remove the backup lamp bulb from the backup lamp socket.

INSTALLATION
1. Install the backup lamp bulb into the backup lamp socket by pushing inward and rotating it clockwise.

NOTE: Install the tail lamp lens with the clear portion (back-up lens) at the top of the housing. Make sure that the gasket is correctly in place and not twisted or torn.

2. Position the tail lamp lens and gasket onto the tail lamp unit.

NOTE: Do not overtighten the tail lamp lens screws or damage to the tail lamp lens may result.

3. Install the four screws that secure the tail lamp lens to the tail lamp unit. Tighten the screws securely.
4. Reconnect the negative battery cable