Tail Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Lower the tailgate.
3. Remove the two screws that secure the tail lamp unit to the cargo box.
4. Remove the tail lamp unit from the cargo box.




5. Disconnect the body wire harness connector from the lamp back plate connector.

INSTALLATION
1. Connect the body wire harness connector to the lamp back plate connector.
2. Position the tail lamp unit into the cargo box.
3. Install the two screws that secure the tail lamp unit to the cargo box.
4. Raise the tailgate.
5. Reconnect the negative battery cable.