Computers and Control Systems: Tools and Equipment

DRBIII (diagnostic read-out box) scan tool - must use the latest release level.

Diagnostic Pinout Box # 8815
Evaporative Emissions Leak Detector # 8404
Terminal Removal tool # 3638
Fuel filler adapter # 8382
Fuel pressure adapter (C-6631) or # 6539
Fuel pressure kit (C-4799-B) or # 5069
Fuel pressure kit # 8978
Fuel release hose (C-4799-1)
Jumper wires
Line pressure adapter (Miller # 8259)
Ohm meter
Oscilloscope
Pressure gauge 0-2068 kPa (0-300 psi)
Transmission simulator # 8833
Vacuum gauge
Voltmeter
12 volt test light minimum 25 ohms resistance with probe # 6801
Fuel pressure gauge # 6828 - Diesel
Fuel test fitting # 9011 - Diesel
Fuel test fitting # 9012 - Diesel
Fuel test fitting # 9013 - Diesel
Fuel test fitting # 9014 - Diesel
Fuel test fitting # 9015 - Diesel
Fuel injector harness tester # 9008 - Diesel
Air induction test tool # 9022

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.

- 5-volt Supply
- J1850 PCI Bus
- CCD Bus
- PCI Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal