Power Distribution Module: Testing and Inspection
FRONT CONTROL MODULEThe Front Control Module (FCM) is a printed circuit board based module with a on-board micro-processor. The FCM interfaces with other electronic modules in the vehicle via the Programmable Communications Interface (PCI) data bus. In order to obtain conclusive testing the PCI data bus network and all of the electronic modules that provide inputs to, or receive outputs from the FCM must be checked. All PCI communication faults must be resolved prior to further diagnosing any FCM related issues.
The FCM was designed to be diagnosed with an appropriate diagnostic scan tool. The most reliable, efficient, and accurate means to diagnose the FCM requires the use of an appropriate scan tool and the proper Diagnostic Procedures.
Before any testing of the FCM is attempted, the battery should be fully charged and all wire harness and ground connections inspected around the affected areas on the vehicle.