Rear

STABILIZER BAR - SRT-10

REMOVAL
1. Raise and support vehicle.





2. Remove lower links mounting nuts (4).





3. Remove stabilizer bar retainer bolts (2) and retainers (3) at the axle.
4. Remove stabilizer bar and remove bushings.

INSTALLATION
1. Install stabilizer bar bushings.
2. Install the stabilizer bar and center it with equal spacing on both sides.





3. Install stabilizer bar retainers (3). Tighten the bolts (2) to 75 Nm (55 ft. lbs.).
4. Install the park brake cable bracket to the retainers (3).





5. Install the links (2) on the stabilizer bar (3). Install mounting bolts and nuts (1&4).
6. Remove support and lower vehicle.
7. Tighten stabilizer link lower nuts (4) to 111 Nm (82 ft. lbs.).