Removal

T56 TRANSMISSION

REMOVAL





1. With vehicle in neutral, position it on a hoist.
2. Mark installation reference marks on the propeller shaft, pinion yoke and transmission output shaft.
3. Remove propeller shaft (4) clamp (3) bolts (1) and remove shaft.





4. Remove shift cover bolts.
5. Remove hydraulic clutch line (2) quick connector (1) at the transmission with Clutch Line Disconnect Tool 6638 or 6638A to disconnect.





6. Remove reverse lockout solenoid (1) connector (2).
7. Remove fuel line clip from top plate stud.





8. Remove back up lamp switch (2) connector (1).





9. Position transmission jack (2) and secure to transmission (1).
10. Remove transmission to clutch housing bolts.





11. Remove transmission mount (2) bolts (1).





12. Remove transmission crossmember (2) bolts (1).
13. Slide transmission back to clear the bell housing. Then lower transmission.