Seat Belt Warning Indicator Always Off - Standard Cab

SEAT BELT WARNING INDICATOR ALWAYS OFF - STANDARD CAB

Seat Belt Warning Indicator Always Off - Standard Cab:

POSSIBLE CAUSES
- (G10) Seat belt switch sense circuit short to ground
- Instrument cluster

DIAGNOSTIC TEST

1. (G10) SEAT BELT SWITCH SENSE CIRCUIT SHORT TO GROUND




Turn the ignition off.
Disconnect the Seat Belt Switch harness connector.
Disconnect the Instrument Cluster C3 harness connector.
Measure the resistance between ground and the (G10) Seat Belt Switch Sense circuit.

Q: Is the resistance below 5.0 ohms?

YES: Repair the (G10) Seat Belt Switch Sense circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: Replace and configure the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test