EVAP Temp Sensor Shorted (Stored)

Test 1:

Test 2:

SYMPTOM
EVAP TEMP SENSOR SHORTED (STORED)

TEST NOTE
This symptom is diagnosed using the test AC PRESSURE TOO HIGH (STORED).

WHEN MONITORED
With the ignition on and the IOD fuse installed.

SET CONDITION
This DTC is displayed if the ATC detects an abnormally low voltage on the evaporator temperature sensor signal.

POSSIBLE CAUSES
- Check for active ATC DTCS
- AC cooldown test fault message(s) present
- Stored codes test complete