Front IR Sensor Not Calibrated (Stored)

Test 1:

Test 2:

SYMPTOM
FRONT IR SENSOR NOT CALIBRATED (STORED)

TEST NOTE
This symptom is diagnosed using the test AC PRESSURE TOO HIGH (STORED).

WHEN MONITORED
With the ignition on and the IOD fuse installed.

SET CONDITION
This DTC is set if the ATC cannot read the IR sensor values or the IR sensor values are not within a defined range of the HVAC air door motor counts.

POSSIBLE CAUSES
- Check for active ATC DTCS
- AC cooldown test fault message(s) present
- Stored codes test complete