Front IR Sensor and Control Head Mismatch (Stored)

Test 1:

Test 2:

SYMPTOM
FRONT IR SENSOR AND CONTROL HEAD MISMATCH (STORED)

TEST NOTE
This symptom is diagnosed using the test AC PRESSURE TOO HIGH (STORED).

WHEN MONITORED
With the ignition on and the IOD fuse installed.

SET CONDITION
This DTC is set if the correct ATC head is not paired with the correct IR module (i.e. left hand ATC head paired with right hand IR module).

POSSIBLE CAUSES
- Check for active ATC DTCS
- AC cooldown test fault message(s) present
- Stored codes test complete