Recirc Door Not Responding (Stored)

Test 1:

Test 2:

SYMPTOM
RECIRC DOOR NOT RESPONDING (STORED)

TEST NOTE
This symptom is diagnosed using the test AC PRESSURE TOO HIGH (STORED).

WHEN MONITORED
Ignition in RUN and IOD fuse installed.

SET CONDITION
This DTC is set when the ATC does not receive feed back pulses within 5 seconds of the drive voltage being applied.

POSSIBLE CAUSES
- Check for active ATC DTCS
- AC cooldown test fault message(s) present
- Stored codes test complete